Catit PIXI Smart Mouse-Shaped HD Cat Camera

WARNING: To guard against injury, basic safety precautions should be observed, including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS and all the important notices on the appliance before using the appliance. Failure to do so may result in damage to this appliance. CAUTION Always unplug or disconnect the appliance from the outlet before putting on or taking off parts and while the equipment is being installed, maintained or handled. Never yank the cord to pull the plug from outlet. Grasp the plug and pull to disconnect. Always unplug an appliance from an outlet when not in use. Never lift the appliance by the cord. CAUTION: THIS IS AN INDOOR CAMERA TO MONITOR PETS. This appliance has been evaluated for indoor supervision of pets only. Do not use this appliance for other than its intended use. The use of attachments not recommended or sold by the appliance manufacturer may cause an unsafe condition. Do not install or store the appliance where it will be exposed to humidity or temperatures below freezing. Shelter the appliance from direct sunlight. Do not place the device near a source of strong electromagnetic interference. Ensure that the appliance or its metal mounting disc is placed on a flat, even surface. Monitor the appliance regularly. Make sure there is nothing obstructing or covering the device. When mounting the camera using the metal mounting disc, ensure the camera is positioned less than 2 meters above ground. Ensure the anti-skid layer on the camera's feet is clean and free of dust and that the magnetic pull between the device and metal mounting disc is sufficiently strong to hold the camera in place. If an extension cord is necessary, ensure the connection is watertight and dust proof. A cord with a proper rating should be used. A cord rated for less amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it can not be tripped over or pulled. Do not use this unit outdoors. This unit is for indoor use only. The electrical adaptor is only to be used with the unit provided. The device uses infrared technology to produce high-resolution images in low light conditions. When enabled in the mobile app, the device will automatically switch to night vision when normal lighting is insufficient to produce an image.